I have stripped down my Innocenti and can not identify the cam. Anyone got any ideas?
Attached Files
-
Camshaft.jpg 26.68K
17 downloads
4 replies to this topic
#1
InnoCOOPER
-
- TMF+ Member
-
- 86 posts
Stage One Kit Fitted
- Location: Cornwall
Posted 13 January 2016 - 10:24 AM
#2
ACDodd
-
- Mini Docs
-
- 2,765 posts
Up Into Fourth
Posted 13 January 2016 - 06:23 PM
Measure the profile. Or have I measured.
Ac
Ac
#3
InnoCooperExport
-
- Members
-
- 372 posts
Speeding Along Now
- Location: Netherlands
- Local Club: Mini Seven Club Nederland
Posted 13 January 2016 - 08:51 PM
Snap: 
This one I just pulled out of my Innocenti Cooper 1300 Export. I am meaning to measure it, but I hear they should be the same as an AEG510 (Cooper S camshaft).
#4
Spider
-
- Admin
-
- 15,075 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 13 January 2016 - 10:43 PM
While it may have the same profile as the AEG510, it will have been the Spyder Drive Version, the AEG542, if it was fitted with the 12G940 Head casting, or if it was fitted with the AEG163 (Casting number) Head, it would have had an AEG522, AEG323 or AEG538 (which were all the same).
Edited by Moke Spider, 13 January 2016 - 10:46 PM.
#5
InnoCOOPER
-
- TMF+ Member
-
- 86 posts
Stage One Kit Fitted
- Location: Cornwall
Posted 15 January 2016 - 12:41 PM
Yes on checking the part no AEG 538 as per the 1300 Innocenti it has a different profile to the 510. it is a Spyder Drive.Mine has a 12G940 Head Casting.
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Ac Dodd TuningStarted by Kevybmini , 04 Jun 2025  engine
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Am I Missing Something?Started by Rubbershorts , 21 May 2025 engine
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
About To Do A Horrible Job - Wish Me Luck And TipsStarted by floormanager , 01 May 2025 engine
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Idler Gear Bearing Is Correct?Started by JimmyStinkpickle , 28 Apr 2025 engine
|
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
‘93 Spi Downpipe ReplacementStarted by ShabbyMini , 03 Apr 2025 engine
|
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
