155 replies to this topic

[minimikej]

I've been busy with the doors and tail gates, will post some pictures soon.

In the meantime, splatted some white Gravitex on the underside.

2022-10-25_11-32-47 by Mike Jackson, on Flickr

[minimikej]

Been working on the bonnet this evening. That X shaped strengthener on the underside is only attached at the corners. One of which was quite rotten, another just about okay with some treatment I think. There was no factory paint under there, so it's quite amazing it's lasted so well really. Just checked out prices for a new bonnet - £200+ ! And probably won't fit either. I'll have to repair this one.

2022-10-25_11-20-53 by Mike Jackson, on Flickr

2022-10-25_11-21-14 by Mike Jackson, on Flickr

2022-10-25_11-21-32 by Mike Jackson, on Flickr

[minimikej]

As promised, some pics of the rear door repair. I'm really happy with how it's turned out. There was quite a lot of hammer work after the welding!

2022-11-03_06-51-41 by Mike Jackson, on Flickr

2022-11-03_06-51-57 by Mike Jackson, on Flickr

2022-11-03_06-52-27 by Mike Jackson, on Flickr

And been working on the rotten bonnet too:

Made up my own corner repair from two pieces welded together -

2022-11-03_06-50-33 by Mike Jackson, on Flickr

2022-11-03_06-51-03 by Mike Jackson, on Flickr

2022-11-03_06-51-25 by Mike Jackson, on Flickr

Happy with that too :)

[minimikej]

Not given up, there's been lots of little jobs, some still to do. Very glad to have her off the rotisserie now.

2023-05-17_09-05-15 by Mike Jackson, on Flickr

[stuart bowes]

good work on that bonnet, I gave up on mine and bought a better 2nd hand one in the end, it was all crusty but at the front end instead

 

that corner piece looks spot on though fair play

Edited by stuart bowes, 17 May 2023 - 09:01 AM.

[Monster26]

Great thread, looks really good what you have done.