Bit of a large update this w/e, and as I've got this week off should get a decent bit done.
The front crossmember and toe board finally arrived so they werer the first jobs.
Those took most of the w/e and since Monday I've been sorting out the door steps/jambs.
First cut off the sills.
The passenger side oversill was ontop of an oversill.
A large pile of rust.
Drilled out the spot welds on the doorstep and removed more rot.
A lot of measuring and a bit of fettling, and the passenger side is clamped in.
Did the drivers side this morning bit a bit more measuring and cutting tomorrow on this side as its only roughly in place. Then weld them in.
Ger