#1
Posted 02 March 2013 - 09:22 PM
Its a 1380 A+ with HIF44.
Can i run it out of the car?
#2
Posted 02 March 2013 - 09:23 PM
You need to have a battery connected, an earth connected and a ignition switch connected and some fuel.
#3
Posted 02 March 2013 - 09:27 PM
#4
Posted 02 March 2013 - 09:31 PM
#5
Posted 02 March 2013 - 09:36 PM
same stuff more wires lolYours is an MPi and I think thats gonna be tricker.
#6
Posted 02 March 2013 - 09:38 PM
#7
Posted 02 March 2013 - 09:45 PM
#8
Posted 02 March 2013 - 09:49 PM
cooling might be an issue
Seen someone run a hose pipe into the one end and just flow water straight threw it.
#9
Posted 02 March 2013 - 09:51 PM
#10
Posted 02 March 2013 - 09:53 PM
will make it much easier to do your trigger wheel bud got mine finished today
is it up and running? Im waiting on delivery still, but my mini is in Germany so cant fit till mid march when i get back.
#11
Posted 02 March 2013 - 09:56 PM
#12
Posted 02 March 2013 - 09:58 PM
#13
Posted 02 March 2013 - 10:02 PM
#14
Posted 02 March 2013 - 10:05 PM
i did put a update on the group buy thread, im based in east anglia
Bit far away to come help you out then, im in Dorset on a course.
#15
Posted 02 March 2013 - 10:14 PM
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Crud In Combustion Chamber.Started by Rubbershorts , 16 Nov 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Full Rebuild MethodologyStarted by PeteD , 16 Nov 2024 engine, electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Low Compression Across The BoardStarted by Vinay-RS , 11 Nov 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Clutch Parts And FittingStarted by Apeman85 , 10 Nov 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1980 998Cc Engine - Can Someone Willing To Learn Strip And Rebuild An Engine?Started by LukeClassicMan , 04 Nov 2024 engine |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users