hey guys , i started my car up last night and on tick over fuel was coming out the overflow :S , now its a pretty fresh rebuild specs are: 1275 , stage 3 head , 276 kent cam , hif 44 with k and n and a stub stack on a mini spares inlet and a bdk needle i think , it been running fine before had it started up for 5 or more times before , but started doing it last night

#1
Posted 04 June 2013 - 08:56 AM
#2
Posted 04 June 2013 - 09:21 AM
you running any sort of filter, could be dirt in the float needle
#3
Posted 04 June 2013 - 09:37 AM
or bang the carb with a big screwdriver handle... might shake the dirt from the needle. I once did it in a hurry in a mini outing to help a stranded mate - it worked!
Sure enough I advised him to look at the carb when he got home!
Edited by klivins, 04 June 2013 - 09:37 AM.
#4
Posted 04 June 2013 - 10:06 AM
ive got a inline filter just out of the fuel tank but the carb had been stud a while , cheers guys will give it a strip down later
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
1966 Mini S - Clutch IssuesStarted by MBradbury73 , Yesterday, 07:03 PM ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Ac Dodd TuningStarted by Kevybmini , 04 Jun 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Am I Missing Something?Started by Rubbershorts , 21 May 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
About To Do A Horrible Job - Wish Me Luck And TipsStarted by floormanager , 01 May 2025 ![]() |
|
![]()
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Which Idler Gear Bearing Is Correct?Started by JimmyStinkpickle , 28 Apr 2025 ![]() |
|
![]()
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users