#1
Posted 07 October 2015 - 07:16 AM
So I don't know if somewhere down the line these wires meet up but they have all miraculously stopped working. So does anyone know what could be the problem, or where to check?
Cheers
#2
Posted 07 October 2015 - 07:42 AM
They'll all be on the second fuse down only live when the ignition is on (think).
#3
Posted 07 October 2015 - 10:13 AM
You mean heater motor? Heater matrix I'd full of water
They'll all be on the second fuse down only live when the ignition is on (think).
Yeah that's what I mean all the fuses are fine, I will check to make sure the wires are still on
#4
Posted 07 October 2015 - 10:18 AM
Check the back of the fuse box for corrosion
#5
Posted 08 October 2015 - 10:42 AM
If it turns out the fusebox is ok then check for a feed in and out on the terminals, and when your satified that you have voltage there, then its time to move to checking the connections at the wiper motor (FAQs has a post showing terminals) and check for a feed into the stalk and out when the flash is pulled.
circuit is below
Attached Files
Edited by KernowCooper, 08 October 2015 - 10:43 AM.
Also tagged with one or more of these keywords: electrical
Mini Technical Sections →
Problems, Questions and Technical →
Misfire - Ignition Fault Or Fuel Problem?Started by derekaka2sheds , 01 Apr 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Mini Spi Charging IssueStarted by Dutch_MiniSPI , 27 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Main Dipped Beam Not Working - Just Before Mot :-(Started by Park , 24 Mar 2024 electrical |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Speeduino EcuStarted by cooperpooper , 09 Mar 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Smiths Electronic Speedo Accuracy?Started by chuee , 01 Mar 2024 electrical |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users