3 replies to this topic

[Mike L]

I copied another wire diagram from the Rover manual. I redrew it  and spread the components out so hopefully it is easier to follow. I have noticed that when the PDF is opened online some of the things I added using Foxit PDF reader/editor are not visible until I down load it and open it in any regular PDF reader. it's in a big format so you can't read much in full page view but when you zoom in on things it's very readable. Let me know if you find any errors so I can fix them.

 

Edit: added missing starter ground symbol

 

Edit 2: corrected miss labeled direction indicator warning lamp

 

Edit 3: corrected mislabeled rear screen switch

 

Edit 4: put the color codes & title back on (lost them in Edit 3)

 

Edit 5: added missing N wire between light switch and fuse 3-4

 

[attachment=185331:ROVER WIRING DIAGRAM SINGLE INSTRUMENT PACK 1984-ON PAGE 86-34.PDF]

Edited by Mike L, 27 September 2016 - 01:32 PM.

[Magneto]

You need to add a legend - that identifies the different components......also, is there a fog light in the diagram?

Instruments has a "T" in it, just FYI...

Thanks for doing this!

Edited by Magneto, 21 September 2016 - 03:50 PM.

[Mike L]

You need to add a legend - that identifies the different components......also, is there a fog light in the diagram?

Instruments has a "T" in it, just FYI...

Thanks for doing this!

Zoom in on the components. The names are on them. In the Rover manual the front fog lights are not on this diagram. It took me a bit to figure out the "T" you were talking about was in the file name and not on the drawing.

Edited by Mike L, 21 September 2016 - 04:28 PM.

[Magneto]

OK, cool....I'll try that. I was talking about the rear fog light, not fronts.....maybe if I zoom in it's there and I just didn't see it?

Edit - found the fog light switch!

I think I'll have Kinko's blow me up a copy so I can read it without scrolling back and forth.

Edited by Magneto, 21 September 2016 - 05:41 PM.