Updating Points Distributor On M.e.d 1380
#1
Posted 06 October 2019 - 03:53 PM
I’m slowly getting around to piecing together my very old MED 1380 engine for a rebuild.
In my Clubman at the mo is an MG Metro 1275 engine with electronic ignition, nothing fancy, just bog standard Metro dizzy.
On the 1380 it’s an old dizzy with points. What is a good upgrade for this that won’t cost a fortune?
Coil pack with no dizzy? Electronic ignition with dizzy but no points?
(I’ll be running a Weber carb, no injection or ecu’s etc)
All suggestions and advice welcome ??
#2
Posted 06 October 2019 - 04:08 PM
The standard metro electronic dizzy with the advance curve suitably modified for the 1380 engine.
#3
Posted 06 October 2019 - 04:11 PM
if the dizzy has been set up with the right springs and advance for the build i would only change it to a pointless set up.
otherwise you will need to be spending quite a bit of money.
#4
Posted 06 October 2019 - 04:16 PM
if the dizzy has been set up with the right springs and advance for the build i would only change it to a pointless set up.
otherwise you will need to be spending quite a bit of money.
The dizzy I have is the one that came with the engine from MED in 1991, I’ve had it in storage for years. Can that dizzy be converted to pointless? Cheers
#5
Posted 06 October 2019 - 04:18 PM
if the dizzy has been set up with the right springs and advance for the build i would only change it to a pointless set up.
otherwise you will need to be spending quite a bit of money.
The dizzy I have is the one that came with the engine from MED in 1991, I’ve had it in storage for years. Can that dizzy be converted to pointless? Cheers
should be easy. if MED supplied it then i would ask them to convert it and maybe adjust the curve for modern fuel if needed.
#6
Posted 06 October 2019 - 04:20 PM
The dizzy I have is the one that came with the engine from MED in 1991, I’ve had it in storage for years. Can that dizzy be converted to pointless? Cheersif the dizzy has been set up with the right springs and advance for the build i would only change it to a pointless set up.
otherwise you will need to be spending quite a bit of money.
You can, it would actually be easier to recurve and rebush a 65D type as it's already electronic and usually more reliable than the kits
#7
Posted 06 October 2019 - 04:20 PM
The dizzy I have is the one that came with the engine from MED in 1991, I’ve had it in storage for years. Can that dizzy be converted to pointless? Cheersif the dizzy has been set up with the right springs and advance for the build i would only change it to a pointless set up.
otherwise you will need to be spending quite a bit of money.
You can, it would actually be easier to recurve and rebush a 65D type as it's already electronic and usually more reliable than the kits
Also tagged with one or more of these keywords: engine, electrical
Mini Technical Sections →
Problems, Questions and Technical →
Crank Damper For Ribbed Belt PulleyStarted by BaronVonchesto , 01 May 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Tapping Noise At IdleStarted by Sterling M , 27 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , 18 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users