#1
Posted 22 June 2021 - 05:20 PM
A local engine machine shop changed them for me and the cam can only be turned by a spanner which they thought was OK. I don't accept this. The cam should turn freely by hand.
Kind regards
Rob
#2
Posted 22 June 2021 - 07:51 PM
Phil.
#3
Posted 22 June 2021 - 08:02 PM
It all depends on which bearings you were supplied with.
some suppliers sell originals that need scraping to fit.
others supply ones that are on size when fitted.
as Phill says yours need cramping to fit.
#4
Posted 22 June 2021 - 08:20 PM
Sorry, I'm not local and can't help with your request here, however;-
,,,,,, changed them for me and the cam can only be turned by a spanner which they thought was OK. I don't accept this. The cam should turn freely by hand.
I gotta wonder what machine shop would think this is OK - regardless of the type of bearings fitted. Running clearance here should be 0.001 to 0.002".
Also tagged with one or more of these keywords: engine
Mini Technical Sections →
Problems, Questions and Technical →
Milky Oil In Rocker After Not Draining Water Before Removing HeadStarted by jezjsa , 11 Mar 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Speeduino EcuStarted by cooperpooper , 09 Mar 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Mini Now Wont StartStarted by jezjsa , 25 Feb 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Rough Running On Standard CoilStarted by Sweep16 , 09 Feb 2024 electrical, engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Duplex Timing Chain Sprockets Alignment IssueStarted by Timrobins , 22 Jan 2024 engine |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users