55 replies to this topic

[Rusty Mike]

Hi Here's the start of a new project. 1960 mini minor, named it the doctor. (doc for short) I found out that the last owner/driver was a doctor, I found paperwork inside from 1984, plus I found a card inside saying Doctor on call.

she does need a bit of medical attention.

 

at the moment Im in the process of stripping her down so that I can start the operation.  

 

 0013.jpg   46.93K   7 downloads

 

 0002.JPG   61.42K   3 downloads

 

 

more pics soon

Edited by Rusty Mike, 07 June 2022 - 07:40 PM.

[wingnut]

Looking forward to this one.Love the plot to

[sonscar]

Nice project,enjoy,Steve..

[Gaz66]

Nurse Gladys Emmanuel springs to mind for some reason.

[Rusty Mike]

 0019.JPG   73.6K   6 downloads  0016.jpg   48.86K   5 downloads  0023.JPG   75.99K   4 downloads

 

 

Thanks for the feedback

heres a couple of pics of the boot and floor

 

all didnt look too bad on the main floor until you give it a little poke. you can see the nice neat hole someone made for a later gearbox.

Edited by Rusty Mike, 09 June 2022 - 08:55 PM.

[Rusty Mike]

 20220610_182933.jpg   49.89K   5 downloads  20220610_185038.jpg   48.05K   6 downloads

 

Did few hours after work. just wanted to get the rear boot area a little more stable before I start the boot floor.

 

the rear subframe is in bad condition. not sure if the car might of had a small bump sometime.

 

anyway, next job put it on the turning frame.

 

 

[Rusty Mike]

put the car on a rollover jig

 

Ive used this jig for a couple of capris so had to do some mods to get it to fit the mini.

 

 0045.jpg   35.04K   2 downloads

 0044.jpg   49.21K   2 downloads

 0047.jpg   56.25K   6 downloads

 

so now have to get the subframes off, 

[Grant 111]

Fantastic find. Look forward to seeing this progress.

[Rusty Mike]

Thanks Grant

might be slow progress, Ive done a few capri's, so know them inside out, but dont know anything about mini's. But did have a clubman when I was 17.

[Rusty Mike]

 20220625_141754.jpg   53.25K   2 downloads

 20220625_141808.jpg   49.26K   2 downloads

 

started the major operation. took both the subframes out, the front one looks to be in pretty good order, but the back one has well and truly had it. so next job is to repair the wheel tubs and weld in a new boot floor.

 

its funny when I read the Haynes manual, and it says its worth checking your subframe after 5 years. they didnt expect the car to last in those days, well 60 years later, I think the back one deserves a new one.  

[Rusty Mike]

 0059.jpg   33.95K   1 downloads

 

Started on the wheel tubs, wanted the get them cleaned and repaired before I put the boot floor in.

 

repaired the passenger side tub

 

 0055.jpg   64.69K   2 downloads

 

 0056.jpg   58K   2 downloads

 

just needs a bit of tidying up

then on to the drivers side

Edited by Rusty Mike, 08 July 2022 - 08:25 PM.

[Rusty Mike]

so on to the boot floor, it was a bit of hassle lining everything up especially when you have no reference, due to most of the back being missing.

 0065.jpg   37.6K   3 downloads

 

 0066.jpg   45.62K   2 downloads

 

 0063.jpg   27.73K   1 downloads

 

just need to do some seam sealing inside the boot, I'm a bit happier now the car has some more structural integrity.

 

I do have some repairs to do on the rear quarters, just a few areas near the arch,

 

 

 

 

[Rusty Mike]

done a little bit more to the mini

 Repaired both rear arches, then a skim of filler ( sand down later)

 

 

 

 0073.jpg   29.96K   4 downloads

 

 0072.jpg   29.94K   2 downloads

 

made a couple of repair sections for the luggage compartments will welding these in before the new floor, and ive done some repairs to the drivers sill. I suppose some would of put a new sill in, but its on a budget. especially when you've just bought the new floor. Ive put a small repair on the cross member, but this will be removed later when Ive repaired it from the underside ( only a small hole).

 

 0068.jpg   44.44K   2 downloads

 

 0069.jpg   38.61K   2 downloads.

 

 0070.jpg   43.74K   2 downloads

 

next job, the main floor

Edited by Rusty Mike, 01 October 2022 - 02:50 PM.

[Homersimpson]

done a little bit more to the mini

 Repaired both rear arches, then a skim of filler ( sand down later)

 

 

 

0073.jpg

 

0072.jpg

 

made a couple of repair sections for the luggage compartments will welding these in before the new floor, and ive done some repairs to the drivers sill. I suppose some would of put a new sill in, but its on a budget. especially when you've just bought the new floor. Ive put a small repair on the cross member, but this will be removed later when Ive repaired it from the underside ( only a small hole).

 

0068.jpg

 

0069.jpg.

 

0070.jpg

 

next job, the main floor

Looking good, nice to see another one being saved.

 

Are you going to change the whole floor and is so are you going to use a MK1 floor from M Machine or are you going to fit a later floor?

[Retro_10s]

Great progress matey, looks like this one got lucky and avoided being scrapped! Glad to see it being saved.