54 replies to this topic

[Rusty Mike]

Put the exhaust on, fuel lines in and the Rad and cowl on.

 

 0181.jpg   66.26K   1 downloads

 

 0178.jpg   36.2K   1 downloads

 

The rad cowling was a pain to fit. but now to the wiring loom. ( I hate wiring)

 

 

 

 

[Rusty Mike]

so done most of the wiring. and put the gearstick in.

had to make some splash guards for the front wheel wells, couldn't find any anywhere. 

 

 0183.jpg   52.47K   3 downloads

 

so copied the  old one, using some aluminium.

 

 0186.jpg   18.58K   3 downloads

 

so now fitted both sides

 

so now on with the interior.

[Rusty Mike]

Got some carpets from Coverdale, they fit very well and where reasonably priced

 

 0188.jpg   30.82K   0 downloads

 

 0189.jpg   41.04K   0 downloads

 

I need to clean the front seats, but ive got a feeling i'm going to need new front seat covers

 

 

[Rusty Mike]

So now I'm on with the front seats

stripped them down, painted the frame and made some new rubber seat support strips.

 

here's the stripped down seat before the repair.

 

 0196.jpg   57.34K   0 downloads

 

bit rusty.

bit of interest, here's the company name who supplied the original foam.

 

 0195.jpg   44.35K   0 downloads

 

Here's the drivers seat I finished earlier.

 

 0197.jpg   38.68K   1 downloads

 

will get on with the passenger  seat.

 

 

[Rusty Mike]

Got the other seat in, and got the wheels on.

 

 0198.jpg   44.42K   0 downloads

 

 0199.jpg   39.4K   0 downloads

 

I need to find a latch for the nearside rear 1/4 window.

 

[Rusty Mike]

Took the car out for its first drive today. all went well.

 

 0205.jpg   50.43K   0 downloads

 

I've still got a few jobs to do

 

[KTS]

Good effort !  looks fantastic

[MatthewsDad]

Wow what a brilliant job!

[Rusty Mike]

Thanks Guys

we've been out a couple of times now, and she's running well.  just need to polish the paintwork and a few small bits inside.

[stuart bowes]

that's a quick turnaround as well especially considering the amount of work needed doing

 

2 years and 25 pages later I'm just about nearly finished the welding

Edited by stuart bowes, 22 April 2024 - 06:25 PM.