i want one!
TwinK - 98% BMW free
#91
Posted 09 December 2007 - 06:21 PM
i want one!
#92
Posted 09 December 2007 - 06:29 PM
#93
Posted 09 December 2007 - 08:53 PM
there any plans before it goes in then? lick of paint perhaps? or somthing more serious
#94
Posted 09 December 2007 - 10:29 PM
Just noticed in the pic the oil filler, had not thought about that, Is it just a mini cap cut off the top of a rocker cover and welded on to a breather pipe?
#95
Posted 09 December 2007 - 10:35 PM
Look forward to seeing it up and running
#96
Posted 09 December 2007 - 10:44 PM
Lick of paint prob on block and def on cam cover
Change of final drive
Try and sort the rad/fan so it fits behind the grill
and other than that just a general tidy up then have some fun!
Filler I think, as not really looked at it closely yet, is just the top cut off the standard breather can with a couple of rivits to act as the pins for the cap to locate on
Edited by Udo, 09 December 2007 - 10:44 PM.
#97
Posted 09 December 2007 - 10:49 PM
is there also another space on the filler cap type bit to vent to an oil catch tank? release pressure from the crank case
#98
Posted 09 December 2007 - 10:59 PM
i see a pipe from the head going there too, to release excess pressure around valve seals id imagin (can cause oil going past)
is there also another space on the filler cap type bit to vent to an oil catch tank? release pressure from the crank case
If you look at the picture with the cat in, you can see the filler cap. To the right is an oil drain from the head and to the left (with masking tape round it) is another connection which goes off to a catch tank
#99
Posted 09 December 2007 - 11:12 PM
yeah in my opinion the gold looks naff but that was suited to the last car wasnt it you can easy add 20bhp when you get some red paint on it tho
#100
Posted 09 December 2007 - 11:29 PM
you can easy add 20bhp when you get some red paint on it tho
Ive never heard so much rubbish spoken in all my life......
Everyone knows BMC green is the choice of champions.....
#101
Posted 10 December 2007 - 12:01 AM
I think Matty is right BMC green, or something close to it as nobody seems to know the correct green
While sort of on a cam cover subject I want the K1200 one that John had down at SC, magnesium and hardly weighd anything, unbelievable how little it weighed
Edited by Udo, 10 December 2007 - 12:04 AM.
#102
Posted 10 December 2007 - 06:33 PM
#103
Posted 10 December 2007 - 08:11 PM
#104
Posted 10 December 2007 - 08:55 PM
Edited by ed4ran, 10 December 2007 - 08:55 PM.
#105
Posted 10 December 2007 - 09:03 PM
Ed, it was easy to find John advertised it on here, the difficult bit was convincing the other half that I should buy it
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users










