9780 replies to this topic

[venkman]

Nothing just stood and admireded my own amazing handy work!!

 

Trying to find the water leak around the boot.

[Tamworthbay]

Thrashed it to MITP and back!

[freaker]

tried to bleed the brakes, but discovered 2 leaks first and then it started pouring out on the drivers side, the bleed nipple went awall

 

then changed the pot joint, thought it would be a hell of a job, but worked out ok, but the cv joint is broken now... so a few steps backwards again

 

 

freaker

[petey81]

tried to remove passenger door!!! stupid seized bolts arrgh

[IainStallard]

Almost **** myself when it backfired up the inlet manifold!

[malcs_miniturbo]

done bit on the gt and primered a few areas more welding next

[alex-95]

fixed the fuel gauge on the ritz

[Leics1275]

Looked inside my dash at the bodge job wiring, and pretty much gave up on the spot

[mk1monster]

drove it...

lost a head lamp guard

 

but parked up at a great location for some photos

Attached Files

•  DSCF3012 - Copy.JPG   92.78K   15 downloads
•  DSCF2974 - Copy.JPG   101.51K   14 downloads
•  DSCF3020 - Copy.JPG   84.71K   9 downloads

[Stu.]

Finished stripping the front subframe of components. Just the rear to get off Ruby and then I'll have a bare shell :)

[joyce1bro]

Got new Bride bucket seats with seat brackets specifically for them to fit the mini (these brackets bolt in the crossmember and the seat belt points). Genuine front and rear Hi-lo's with knuckles and compression tool. Twin 1.5 carbs (need rebuilding)

[Ipod]

Fitted a De-cat pipe to minimi mpi

[Was a Mayfair but not now]

i put blue silicone tape on my engine hoses. looks ok and saved me splashing out £££££££££££ sss on a proper set.

[Was a Mayfair but not now]

i put blue silicone tape on my engine hoses. looks ok and saved me splashing out £££££££££££ sss on a proper set.

 bbb.PNG   736.74K   23 downloads

[davej]

Did a cylinder leakage test then decided it needs a new engine