They said that the coil pack is new :s I know I paid for a new one last year, but they said they have replaced it in the last few weeks incase it was that thank you though :)
Please Help! Ecu And Wiring Loom :(
#16
Posted 24 March 2016 - 06:22 PM
#17
Posted 24 March 2016 - 06:43 PM
cam sensor is one git of a problem and will cause intermittent issues
#18
Posted 24 March 2016 - 07:28 PM
It's going to Wiltshire!
I would have thought Bristol Mini & Cooper Club would have recommended someone more local, on the upside i've heard of Somerford.... OK i'm joking -everyone whose seriously into their Minis have heard of Somerfords. They WILL fix it.
Also on the plus side: intermittent wiring problems can be a real so&so to locate, if it's now a consistent problem it's easy to find (lets hope this is still the original problem & not a new one your local garage has caused).
From the info i have available to me Pin 25 on the ECU red connector is Crankshaft Position Sensor & Pin 25 on the Black connector is Ignition Coil Pack signal. Chances are it's a fault with a wire or connector as all the components (& everything under the sun) has been changed -but whatever it is you'll soon have the Mini back & working properly .
#19
Posted 26 March 2016 - 12:28 AM
It's going to Wiltshire!
I would have thought Bristol Mini & Cooper Club would have recommended someone more local, on the upside i've heard of Somerford.... OK i'm joking -everyone whose seriously into their Minis have heard of Somerfords. They WILL fix it.
Also on the plus side: intermittent wiring problems can be a real so&so to locate, if it's now a consistent problem it's easy to find (lets hope this is still the original problem & not a new one your local garage has caused).
From the info i have available to me Pin 25 on the ECU red connector is Crankshaft Position Sensor & Pin 25 on the Black connector is Ignition Coil Pack signal. Chances are it's a fault with a wire or connector as all the components (& everything under the sun) has been changed -but whatever it is you'll soon have the Mini back & working properly .
Good info, I would like your comment but have run out of likes yet again.....
#20
Posted 26 March 2016 - 06:58 AM
Also tagged with one or more of these keywords: electrical, engine
Mini Technical Sections →
Problems, Questions and Technical →
Crank Damper For Ribbed Belt PulleyStarted by BaronVonchesto , 01 May 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Tapping Noise At IdleStarted by Sterling M , 27 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Piston Rings - A-Series 998 Engine - Help RequiredStarted by WanaGo , 18 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
Exhaust Choice 45Dcoe - Rc40?Started by lachlan1275gt , 13 Apr 2024 engine |
|
|
||
Mini Technical Sections →
Problems, Questions and Technical →
1071 Main Bearing Caps.Started by 246jaenick , 02 Apr 2024 engine |
|
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users